Jamb, Waec, Neco, Nabteb Quiz & Series The Flashreaders Jamb, Waec, Neco, Nabteb Quiz … Take Quiz Now >
Real Waec Metal Work Syllabus And Hot Topics You Should Study
Welcome, kindly check this out after reading!
- WAEC Syllabus And Hot Topics You Should Study
- JAMB Reprinting Procedures – How To Check Exam Date & Center
- WAEC past questions and answers
- The recommended waec textbooks and Jamb
- Is WAEC and NECO Syllabus The Same? – See Answers
- How To Successfully Pass Waec without expo 2022
- Read: Jamb 2022/2023 Cut Off Marks for All Schools
- Areas Of Concentration For Waec (The Guild)
You’re here: Real Waec Metal Work Syllabus And Hot Topics You Should Study. Are you writing Waec Metal Work 2021? do you want to pass waec Metal Work 2021? are you writing Metal Work in Waec 2021? are you looking for Real Waec Metal Work Syllabus And Hot Topics You Should Study?
Well, if that’s why you are here then I must tell you a very big welcome to 9jajoinlearn.
- How Many Questions Will Jamb Set This Year? - Read!
- How Can I Cheat In Jamb? - Guide on Jamb Expo
- Full List of Post UTME Subjects 2022
- How To Pass Waec Biology Exam 2022 – (Waec Series Pt42)
- Subjects Required For Industrial Chemistry 2022
- Is Economics Compulsory For Mass Communication? – See Answer
- Does Mass Communication Require Maths? - See Answers
- Is Biology Compulsory For Art Students in Waec? – See Answer
This is the official 2021 waec GCE syllabus for Metal Work. I will make it available for download later. You may click here for how to pass waec GCE 2021/2022 or click here for a Waec GCE syllabus for all subjects.
METALWORK
PREAMBLE
The examination is designed to test the candidate’s skills in basic design, practical work, and entrepreneurship.
It will also assess their knowledge of tools, equipment, and materials and understanding of those areas of creative thinking which can be expressed and developed through planning and working primarily on metals as part of general education.
The test will also assess the candidate’s competency in the fundamentals of manufacturing to pursue higher education in science and technology.
AIM
The aim of the syllabus is to test the candidate’s acquisition of the requisite knowledge and skills needed to pursue further education and self-development in science and technology.
OBJECTIVES
Candidates will be expected to
(1) observe safe working practices in the workshop;
(2) demonstrate knowledge and understanding of tools, material, and equipment;
(3) apply basic processes for the care and maintenance of hand and machine tools;
(4) have the ability in identifying, analyzing and evaluating a problem;
(5) apply their knowledge of processes and materials to the solution of problems;
(6) demonstrate basic skills of good craftsmanship;
(7) apply knowledge of career opportunities in metalwork;
(8) have the ability to translate an idea into a project design.
SCHEME OF EXAMINATION
The examination shall consist of three papers, Papers 1, 2, and 3, all of which must be taken. Papers 1 and 2 will be a composite paper to be taken at one sitting.
Paper 1: Will consist of forty compulsory multiple choice objective questions. Candidates will be allowed 1 hour to answer the questions. The paper will carry 40 marks.
Paper 2: Will consist of five questions out of which candidates will be expected to answer four in 1½ hours. The paper will carry 60 marks. All questions will carry equal marks.
Paper 3: Will be a practical test of 3 hours. 10 minutes shall be given prior to the commencement of the examination for the study of the drawings.
The paper will consist of two questions out of which candidates will be expected to answer one. They will be required to make a test piece for which the appropriate drawings will be supplied.
The paper will carry 100 marks. Schools will be required to supply materials that will be needed for the practical test.
DETAILED SYLLABUS
LIST OF MATERIALS AND EQUIPMENT FOR METAL WORK WORKSHOP
Recommended workshop size:
Purpose-bulk 14m length x 8m width x 4m height, well ventilated and illuminated.
Safety Equipment and Materials;
Fire extinguishers, first aid box, buckets of sand, CO2 wall charts etc.
1. Workshop Tools
(a) Cutting tools: Hacksaw, drills, chisels, snips, files, stock and die, scrappers, reamers, turning tools, milling machine, shaping tools.
(b) Measuring tools: Steel rules, inside and outside callipers, combination square, micrometer screw gauges,verniergauges, vernier protractors, spirit level, dial gauges.
(c) Marking out tools: Surface gauge, surface plate, try square, vee-block, dividers, odd leg callipers, trammels, straight edge, scriber, angle plates, centre punches.
(d) Driving tools; pin punches, screwdrivers, hammers, drifts.
(e) Work holding devices: clamps, vices, pliers, mole grips, self-gripping wrenches.
(f) Forging tools: hardies, fullers, tongs, swages, anvils, anvil stands, letter stamps and stakes, sandbag.
2. Workshop Equipment
Workbenches, marking out table, blacksmith’s hearth, foundry furnace, sets of toolboxes, oil cans, computer hardware, and software.
3. Machine Tools
Centre lathe(with accessories), sensitive and pillar drilling machines, pedestal grinder, power hacksaw, folding machine, shears, rolling machine, milling, shaping machine, etc
Welding Equipment
Standard arc welding machine accessories, electrodes, shields, aprons, chipping hammers, welding boots, standard oxygen, and acetylene cylinders, filler rods, spark lighters, regulators, nozzles, etc.
Materials
Mild steel round bars (03mm – 050mm), Flat bars (of different sizes), Square bars, Hexagonal bars, Mild steel sheets and plates, Galvanized and tinned sheets. Projects may be constructed with non-ferrous metal e.g. Copper, Aluminium and Brass.
RECOMMENDED TEXTBOOKS
1. Workshop Technology (parts 1 and 2) – W.A.T. Chapman
2. Metalwork Technology – G. H. Thomas
3. Metal Technology – C. E. S. A. C.
4. Introductory Technology – C. E. S. A. C.
5. Welding Technology – Gourd
6. Mechanical Engineering practice – A. Green and W.H. Howe
7. Crafts Theory and Related Studies – R.T. Pritchard Vol. 1 & 2
8. Mechanical Engineering – R.I. Timings
9. Metalwork Theory, Books 1, 2, 3, & 4
(Metric Edition) – P.F. Lye – Harrap, Lon
10. Design Technology in Metal and Plastics
(Metric Edition) – G.H. Thomas-John Murray
11. Jab Metalwork Projects for African Schools
and Colleges – R. Edward – Cassel Lon
12. Basic Engineering Processes – S. Crawford
13. Metalwork – R. Sandham
& F.R. Willmers
14. Workshop Processes and Materials – J. V. Courtney
15. Metalwork Projects and Theory (S.I. Units) – K. Parkinson
16. The Theory and Practice of Metalwork
(3rd Edition) – G. Love
17. Metalwork for Schools and Colleges – J. N. Green
18. Metal Cutting Machine tools – Adejuyigbe, S. B.
19. Metalwork Technology – J.K.N. Sackey
S. K. Amoakohene.
Feel free to ask your questions and don’t fail to share this article via your favorite share buttons below.
Leave a Reply